• by vinux

Is the Yixing Zisha teapot mud material good? There are many kinds of Yixing Zisha pottery mud material, each with different characteristics and uses. The mud is divided into raw ore section mud, sesame section, golden section. The purple sand pots made from various mud have different functions and are suitable for different types of tea. Let’s take a look together.

Raw Ore Sludge

The particles contained in the mud are large, the structure is loose, and the body has a obvious double-air hole structure, which facilitates air convection. After long-term use, the sharpness gradually reveals and forms the best equipment for pot making with great changes. Tea is delicious and praised! In the early stage, the mud was mixed with a low temperature fired kiln, which would “spit black” in general silk mud products; recently, high temperature kilns were used for firing silk mud pots, and they can easily be raised to the required temperature to achieve higher crystallization and never spits black! Ore area address: Yixing Dingshan Huanglong Mountain Firing Kiln Temperature: About 1150°C Shrinkage Ratio: About 13%.

Suggested brewing types: Pu’er Tea Series, Tie Guan Yin and Semi-fermented Teas, Fully-fermented Teas (Black Tea Series), Raw Pu’er Tea (Lightly Roasted Series), Green Tea, Longjing, Black Tea etc.

Sesame sentence
A sesame sentence is a type of Chinese language punishment used to make someone remember what they have done wrong. It involves the repetition of certain words or phrases that have a meaning related to the mistake or wrongdoing.

The particles contained in the clay body are large, the structure is sparse, and the body has obvious double gas holes, which makes the air flow smoothly. After long-term use, it gradually reveals its sharpness and becomes the best equipment for cultivating kettles with great changes. Tea tastes good and can’t be praised enough! The early clay mixing was made at lower temperature in early kilns, and “black spitting” would occur in general satin products; recently high temperature kilns have been used, and satin teapots can easily be elevated to the required temperature to achieve a higher crystallization and never “black spit”! Mine address: Huanglong Mountain, Dingshan Town, Yixing City, Jiangsu Province Firing kiln temperature: about 1150 °C Shrinkage rate: about 13%

It is recommended to brew Pu’er tea series, Tieguanyin and semi-fermented teas, post-fermented teas (black tea series), raw oolong tea (light roasting series), green tea, Longjing Tea and red tea.

Golden paragraph

The particles in the clay are large and the structure of the porous body is obviously double-vent structure, which is conducive to air convection. After long-term use, it gradually reveals its sharpness, forming an ideal equipment for teapots with great changes. Tea tastes good and praise can’t stop! In the early days, the clay mixture was fired with a low temperature kiln. Generally speaking, “spitting black” would occur in satin products; while recently, high temperature kilns have been used to fire satin pots and easily lift them to the required temperature to achieve a higher crystallization without spitting black! Mineral area address: Huanglongshan Firing Kiln in Yixing, Jiangsu ProvinceFiring Temperature: Approximately 1150°CFired Shrinkage Ratio: Approximately 13%

Suggested brewing: Pu’er tea series, Tieguanyin and semi-fermented teas, heavily fermented teas (black tea), Wulong raw tea (lightly roasted series), green tea, Longjing, black tea and so on.

Is the Yixing zisha teapot clay material good or not? I’m afraid it’s hard to give you an accurate answer. Each type of clay has its own characteristics and its purposes may vary. All we can say is that if that kind of clay is produced in small quantities, then it will be relatively valuable because rarity makes it precious. Additionally, the best teapot is one that you like brewing with your favorite tea.